How to check all the features of your PC on Windows 10?


How to check all the features of your PC on Windows 10?: If you are using a desktop computer or laptop and have understood all of the elements and OS information inside, it will be useful for you in many ways. For example, if you are planning to add more RAM, you need to know how much RAM your computer’s motherboard supports.

Knowing your computer can help you troubleshoot any problems. So it is very important to know the full details of your PC. You don’t need any third-party software to know the full details of your PC’s features.

How to test the full features of your PC on Windows 10?

On Windows 10 you can test all the features of your device. Input / Output System, Firmware, Model Number, Processor, Memory, Drive, Graphics, and many more are easy to understand. In this article, we are going to explain some of the ways to know the hardware and software features of the device.

1. Processor, RAM, Device ID, and Windows Version Testing 

If you would like to know some common features such as processor, RAM, and the current version of Windows, follow these steps.

Step 1. First, click the Start button and go to Settings. 

Step 2. Click System. 

Step 3. Under System, click About. 

Step 4. In the About section, check ‘Device Specifications’ and ‘Windows Specifications’. 

Device name, processor, RAM, etc can be tested under Device Specification. The current version of the Windows operating system can be found under the Windows Specification section.

2. Graphic Card Checking (GPU)

The graphic processor information used by your PC is not available in the above method. To test the GPU used by your PC follow the following simple procedure.

Step 1. First right-click My My Computer. 

Step 2. Click on ‘Properties’. 

Step 3. Now in the System page, you need to click on ‘Device Manager’. 

Step 4. Here you can search and Expose Display Adapters. Your GPU is listed there.

3. Examining the Mother Board

We are going to tell you how to check which motherboard your PC has. You can test your PC’s motherboard by following these simple steps. 

Step 1. First, open the Windows Search bar and type Why System Information.

Step 2. Open System Information and scroll down until ‘Motherboard Manufacturer’ or ‘BaseBoard Manufacturer’. 

Step 3. The BaseBoard Manufacturer tells you the Mother Board Company and the BaseBoard Model tells you the Model Number.

4. Checking system information using the command prompt

If you do not wish to follow the steps above, you can use the Windows Command Prompt to obtain system information. So let’s take a look at how to find system information on Windows 10. 

Step 1. First right-click the Start button and select ‘Command Prompt’.

Step 2. In the command prompt, type ‘systeminfo’ and press the enter button. 

Step 3. Now you will be able to view the system information. You should type Why systeminfo /? ‘For more information. This will help you learn more about your computer. 

These are four of the best ways on Windows 10 to learn about your PC. Be sure to comment if you know of other ways to do so.